Product Summary
BSIDE New Touch Screen Digital Oscilloscope+Signal Generator Dual Channel 50MHz Automatic is a digital oscilloscope selected for checking waveforms, debugging signals and validating circuit behavior. It is suitable for electronics repair technicians, lab users and embedded developers who need practical electronics hardware for reliable project work.
Best For
- checking waveforms, debugging signals and validating circuit behavior
- test leads, probes and bench electronics workflows
- Electronics testing, repair, prototyping and maker workflows
FAQ
Who is this product for? It is intended for electronics repair technicians, lab users and embedded developers.
What should I check before buying? Review the product options, specifications, included accessories and compatibility details on this page.
BSIDE O2 is the latest Dual-channel touch-screen oscilloscope signal generator from BSIDE brand.
With comprehensive functions and high practicality, targeting people in the maintenance and R&D industries.
This device has two major functions: oscilloscope and signal generator. The oscilloscope adopts FPGA+MCU+ADC hardware architecture.
It has a sampling rate of 250MS/s, an analog bandwidth of 50Mhz, a built-in high-voltage protection module, and supports a maximum peak voltage measurement of ±400V; supports waveform screenshots. Save and view to facilitate secondary analysis.
Inside Set up a DDS function signal generator, which can output 12 kinds of function signals. The maximum output of the signal generator is 2MHz, with a step of 1Hz; output frequency, amplitude, and duty cycle Adjustable.
It uses a 3.98-inch touch display and a built-in 3000mAh rechargeable lithium battery with a standby time of up to 7 hours.
With small size,Provide users with more and stronger practical functions, while also having good portability.
Oscilloscope:
Channel:Dual channel.
Analog bandwidth:50MHz.
Real-time sample rate:250MSa/s.
Storage depth:Up to 128kByte.
Input mpedance:1M ohm.
Time base range:10ns/div - 20s/div.
Vertical sensitivity:10mv/div - 20v/div.
Time base accuracy:20ppm.
Maximum measured voltage:±400V.
Probe:1x/10x.
Bandwidth limitSupport 20MHz limit.
Trigger mode:AUTO/Normal/Single.
Trigger type:Rising edge, Falling edge.
Waveform display mode:XY/YT/Scroll.
Coupling method:AC/DC.
Measured data:Period, frequency, peak-to-peak value, maximum value, minimum value, Average value, effective value, amplitude, duty cycle, waveform width.
Math alculations:1+2、1-2、1*2、1/2、-1、-2、|1|、|2|、FFT.
Save waveform screenshot:Yes.
Export waveform images from computer:Yes.
Signal Generator:
Channel:Single channel.
Frequency:0-2MHz(Sine wave: 10MHz, other waveforms 5MHz)
Amplitude:0.1V-3.0V.
Square wave duty cycle0-99%.
Signal type:sinusoidal wave, square wave, sawtooth wave, half wave, full wave, positive step wave, negative step wave, DC signal, exponential rise, exponential fall, multi-audio, and sync waveform.
Basic Parameters.
Screen size & resolution:3.98 Inch (480*272 pixels).
Screen material:Surface tempered glassSurface tempered glass + touch screen made of glass GLASS + TFT color screen.
Backlight brightness can be set:30%/50%/80%/100%.
Power supply:TYPE-C(5V/2A)
Battery:4000mAh lithium battery.
Language:English/Chinese.
Product size:about 170x81x24mm.
Product net weight:about 268g.
Package Inclusions:
1.O2 Products
2. Oscilloscope probes*1
3. Oscilloscope probes*1(optional)
4. Multimeter probe *1
5. USB Data cable *1
6. Carrying cloth bag.
7. Product Manual *1
8. 12 months warranty card.