Product Summary
PCIe to MiniPCIe / Gigabit Ethernet / USB 3.2 Gen1 HAT for Raspberry Pi 5 Extend 2-Ch USB is a single-board computer accessory selected for expanding SBC projects, remote management and embedded computing setups. It is suitable for Linux makers, automation users and edge computing builders who need practical electronics hardware for reliable project work.
Best For
- expanding SBC projects, remote management and embedded computing setups
- Raspberry Pi, Linux boards and maker project hardware
- Electronics testing, repair, prototyping and maker workflows
FAQ
Who is this product for? It is intended for Linux makers, automation users and edge computing builders.
What should I check before buying? Review the product options, specifications, included accessories and compatibility details on this page.
Onboard MiniPCIe slot, Compatible with SIM7600G-H-PCIE / EG25-G mPCIe series 4G modules
4G module |
SIM7600G-H-PCIE |
EG25-G mPCIe |
 |
 |
|
Frequency band | ||
LTE-FDD |
B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 |
B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 |
LTE-TDD |
B34, B38, B39, B40, B41 |
B38, B39, B40, B41 |
WCDMA |
B1, B2, B4, B5, B6, B8, B19 |
|
GSM |
850, 900, 1800, 1900 MHz |
|
GNSS |
GPS, Beidou, GLONASS, GALILEO, QZSS |
|
Data Transfer | ||
LTE-FDD |
150 Mbps (DL) / 50 Mbps (UL) |
|
LTE-TDD |
130 Mbps(DL) / 35 Mbps(UL) |
130 Mbps(DL) / 30 Mbps(UL) |
HSPA+ |
42 Mbps (DL) / 5.76 Mbps (UL) |
|
WCDMA |
384 Kbps (DL) / 384 Kbps (UL) |
|
EDGE |
236.8 Kbps (DL) / 236.8 Kbps (UL) |
296 Kbps (DL) / 236.8 Kbps (UL) |
GPRS |
85.6 Kbps (DL) / 85.6 Kbps (UL) |
107 Kbps (DL) / 85.6 Kbps (UL) |
Software Features | ||
Operating system |
Windows / Linux / Android |
|
Communication protocols |
TCP, IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNS |
TCP, UDP, PPP, FTP, HTTP, NTP, PING, QMI, NITZ, SMTP, MQTT, CMUX, HTTPS, FTPS, SMTPS, SSL, MMS, FILE |
SMS |
Supports MT, MO, CB, Text, PDU |
|
Firmware upgrade |
USB/FOTA |
USB/DFOTA |
Hardware Specifications | ||
SIM card |
1.8V / 3.0V |
|
Antenna interface |
IPEX-1 connector (LTE main antenna + LTE diversity antenna + GNSS antenna) |
|
Power supply |
3V - 3.6V |
|
Form factor |
Mini-PCIe |
|
Dimensions |
50.8 x 31.0 x 5.5 mm |
51.0 x 30.0 x 4.9 mm |
Operating temperature |
-40 deg C - +80 deg C |
|
Applications | ||
Applicable regions |
global coverage |
|
Note: The 4G module is optional, please refer to the Package Content for detailed part list. The above are the supported modules after testing; If you need to use with other modules, please confirm the interface compatibility of your module. | ||
Real-time monitoring of power status, supports USB port power control via software
RTL8153B
USB to Gigabit ETHVL805
PCIe to USB 3.2 Gen1 HUB chipINA219
Power monitoring chipEEPROM
for saving HAT ID and product informationRaspberry Pi GPIO header
for connecting Raspberry Pi 5MiniPCIe slot
for connecting the 4G module with MIniPCIe interface16PIN PCIe interface
for connecting to the PCIe interface of Raspberry Pi 5
8 .Type-C interface
for 4G networking of Raspberry Pi or PC via USB cable, firmware updating, or external power supply input
9. Nano SIM card slot
for installing Nano-SIM card
10. Gigabit Ethernet port
up to 1000Mbps data rate, compatible with 100Mbps
11. USB 3.2 Gen1 expanded ports
USB1-USB2
12. DIP switchs
for switching to use GPIO D6 pin to control power ON/OFF of the module and switching the module USB signal output direction
13. NET indicator
Module Network status indicator
14. PWR indicator
Power indicator
